EN 10025-6 S690QL PLATES

EN 10025-6 S690QL HIGH-STRENGTH STEEL PLATES, S690QL PLATES SUPPLIERS, HIGH-QUALITY EN 10025-2 S690QL PLATES, EN 10025-2 S690QL HOT ROLLED PLATES, QUENCHED AND TEMPERED STRUCTURAL STEEL S690QL STEEL PLATES, DILLIMAX S690QL PLATES, S690QL PLATES STOCKIST IN MUMBAI, INDIA.

S690QL COLD ROLLED PLATES, S690QL PLATES DEALER, HIGH STRENGTH S690QL PLATES, EN 10025-2 S690QL SHEET AND PLATE EXPORTER, S690QL STRUCTURAL STEEL PLATES, EN 10025-2 S690QL PLATES SUPPLIER IN MUMBAI, INDIA. 

S690 QL is a high-yield structural steel grade produced in compliance with EN 10025:6:2004. The material is heat treated using the quench and temper process and has good bending and welding properties.

Due to the material’s high-strength nature, using S690QL will promote leaner-designed structures with increased payload capacity and energy efficiency.

Please refer to the technical details below referring to S690QL.

Grade Designation
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Quenching & Tempering
L = Low notch toughness testing temperature EQUIVALENT GRADE OF EN 10025-2 S690QL PLATES
Standard ASTM DIN, WNr JIS AFNOR ISO 4952
EN 10025-2:2004 A709-100 TStE690V DILLIMAX 690 NAXTRA 70 JFE HITEN 780LE E690T
E690TFP S690T E690

SPECIFICATION

• Item Quenched And Tempered Structural Steel Plate
• Material QUARD, SUMIHARD, BRINAR, DUROSTAT, DILLIDUR, JFE EVERHARD
• Thickness 3 – 200mm
• Width 500 – 3000mm
• Length 1000 – 12000mm
• Heat Treatment N, Q+T
• Surface Paint EP, PE, HDP, SMP, PVDF QUENCHED AND TEMPERED STEEL PLATES

Chemical composition

C 0.20 max.(%)%       Si 0.80 max.(%)%       Mn 1.70 max.(%)%          P 0.020-0.025%      S 0.010-0.015%

Al 0.015 max.(%)%   Cr 0.005 max.(%)%     Cu 1.50 max.(%)%           Ni 0.50 max.(%)%        Mo 0.70 max.(%)% 

Nb 0.06 max.(%)%    Ti 2.00 max.(%)%        V 0.12 max.(%)%