SS 410S

SS 410M COILS SUPPLIERS, STAINLESS STEEL 410M HOT ROLLED PLATES, STAINLESS STEEL 410M SHEETS & PLATES, STAINLESS STEEL 410M SHEETS, STAINLESS STEEL 410M COLD ROLLED SHEETS, STAINLESS STEEL 410M PLATES STOCKIST IN MUMBAI, INDIA.

SS 410M SHEET & PLATE, ASTM A240 STAINLESS STEEL 410M HR PLATES DEALER, STAINLESS STEEL 410M SHIM SHEETS EXPORTER, SS 410M CHEQUERED PLATE, STAINLESS STEEL 410M PERFORATED SHEET SUPPLIER IN INDIA.

410 stainless steel is a hardenable martensitic stainless steel alloy. Unlike austenitic grades it can be heat treated (“quench and temper”) to generate high strength with good ductility. 410 alloy is required when strength, hardness and wear resistance is required with some corrosion resistance.

Due to the hardening capabilities of this steel, other properties and the resulting performance of this material are somewhat compromised. The alloy can only effectively be used in mildly corrosive environments.

The operating temperature range is limited a) a loss of strength by over tempering at elevated temperatures and b) a loss of ductility at sub-zero temperatures.

Type 410 is officially a stainless steel but characteristically the material is actually a compromise of high carbon steel alloy (which promotes wear resistance) with chromium stainless steel (which promotes corrosion resistance).

This steel is ideal for use in the manufacture of highly stressed parts found in a variety of industries including petrochemical, automotive and power generation.

EQUIVALENT GRADE OF SS 410M SHEETS, PLATE & COILS
STANDARD WERKSTOFF NR. UNS
SS 410M – –

SPECIFICATION

• Specifications ASTM A240 / ASME SA240
• Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
• Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
• Thickness 0.1mm to 12 mm Thk
• Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
  

Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. STAINLESS STEEL MARTENSITIC GRADES

Chemical composition

C 0.08 max%        Si 1.00 max%        Mn 1.0 max%        P 0.040 max%        S 0.030 max%        Al %

Cr 11.50 – 13.50%        Cu %        Ni 0.20 – 0.55 max%        Mo %        Nb %        Ti %        V %